Side Sliding Leaf Doors

When planning gates, space often presents a particular challenge in many halls. It is not everywhere that there is enough space to the side for a sliding gate.
Of course, ALPGATE offers a ground-supported or suspended above customised solution to this. Our side sliding leaf door bend and contort for you. They can be adapted to places where hardly anything else fits. If there is too little space to the sides, then the ALPGATE articular sliding gate follows the side wall as if by magic. With a lateral space requirement for the deflection of 20 cm, we offer an all-round patent solution when it gets tight. Circular flights can be produced by us with a standard width of up to 100 m and a height of up to 30 m.

Thinking around the corner

We are able to make your gate slide 90 degrees (or more) around the corner. Element widths from one to 1.35 meters (or wider on request) make this effortlessly possible. In the curve area, only approx. 200 millimeters of space are required to implement this technology. Precisely lasered curve parts are our secret when it comes to running smoothness. The doors are suspended or run on the floor, like a sliding folding door. Several carriages hanging on top of a running rail and a guide rail on the floor ensure problem-free handling. The gates can be opened and closed manually or automatically, depending on the intended use and customer requirements.
The gates are suspended, like a sliding folding gate, with a slide rail at the top and a guiding rail on the ground to ensure easy operation. They can be opened manually and automatically. The strengths of the articular sliding gate by ALPGATE: space-saving, little noise, low-maintenance, high flexibility through adaptability to the building structure, extensive individual options.

strengths

Side sliding leaf doors for the KönigLaurin 2 mountain station

The overhead circular sliding doors with the dimensions 6050mm x 4125mm (WxH) were filled with sandwich sheet metal panels and coated on both sides in RAL9005 matt. In the passage area of the cable car, the gate rails were interrupted over a width of approx. 1250mm. The two gate systems were also designed with a self-regulating trace heating system in order to guarantee smooth operation even in extreme weather conditions. The 1,807m long cable car takes passengers comfortably and weatherproof directly up to the rocks of the rose garden to the Kölner Hütte at 2,337m via a middle station. Learn more…

Let yourself be inspired..

More gate systems